Most homes heat every room to the same temperature for the same hours, including the spare bedroom nobody sleeps in and the office that is empty at the weekend. A smart radiator valve replaces the head of an ordinary radiator valve and gives each room its own schedule: warm in the morning and evening, cool when nobody is there. This guide explains how they work, whether they will fit your radiators, what they cannot do on their own, and the cheap parts that stop heat leaking out.
Links on this page are affiliate links: if you buy through them we may earn a small commission, at no extra cost to you.
How smart radiator valves save heat
A thermostatic radiator valve (TRV) is the numbered knob on the side of most UK radiators. It opens and closes the flow of hot water into that radiator to hold the room near a set level. A smart TRV does the same job with a motor and a schedule: you choose a temperature for each room and each part of the day in an app, and the valve follows it.
The saving comes from not heating rooms that are empty. How much you save depends on the house, how many rooms you can turn down and when you are home, so be wary of any fixed percentage. A small flat that is heated all evening saves little; a family house with a guest room, an office and bedrooms that are empty all day saves far more.
What works and what does not
- Smart TRVs fit most UK radiators. The common valve thread is M30 Γ 1.5, which most smart TRVs screw onto directly. Older or branded valve bodies (Danfoss RA, RAV, RAVL and others) need a small plastic adapter, and many kits include several. Unscrew the old head, check the brand stamped on the valve body, and you will know which adapter you need. You do not need to drain the system to swap a head.
- A TRV does not switch the boiler on. It only opens or closes one radiator. The boiler still fires when your wall thermostat or boiler timer calls for heat. Smart TRVs stop the heat going into empty rooms; they do not, on their own, make the boiler run less if the thermostat keeps calling for heat. Controlling the boiler itself means wiring a smart thermostat, which is a job for a qualified heating engineer, so we do not link one here.
- Leave one radiator without a TRV. The room with the wall thermostat (often the hallway or living room) should keep its radiator fully open, otherwise the TRV and the thermostat fight each other and the boiler can keep firing with nowhere to send the heat. Many boilers also need at least one open radiator or a bypass valve.
- Zigbee TRVs need a hub. Most cheap smart TRVs on AliExpress are Tuya Zigbee models. They pair with a Tuya Zigbee gateway, Home Assistant or Zigbee2MQTT. If you already have a Zigbee hub, you only need the valves. Battery life is usually around a season on two AA batteries, longer with fewer adjustments.
- Stop the heat escaping too. Reflector foil behind radiators on outside walls sends heat back into the room, and self-adhesive draught strips on doors and windows close the gaps that cold air comes through. Both are cheap and work with or without smart valves. We link a draught strip below but no foil: none on AliExpress had enough orders and a clear radiator photo, and any DIY shop sells it.
- Bleed the radiators first. A radiator that is cold at the top has air in it and heats the room slowly, whatever valve it has. A radiator key fixes it in a minute.
π οΈ Parts for heating room by room
1. Zigbee smart radiator valve (TRV) with schedule and app
2. Radiator valve adapter set (Danfoss RA, RAV, M28 and others)
3. Tuya Zigbee gateway to control the valves (skip it if you have a hub)
4. Zigbee temperature & humidity sensor to see each room's real temperature
5. Self-adhesive draught strip for doors and windows
6. Radiator bleed key to let trapped air out
π Need a different valve, adapter or a longer draught strip?
Search OneFindMe in plain words, for example βzigbee trvβ or βdanfoss rav adapterβ, and see every current option with today's prices.
Search smart radiator valves βFive steps to heat only the rooms you use
- Bleed the radiators β With the heating off and the radiators cool, open each bleed valve with the key until water comes out, then close it. Check the boiler pressure afterwards and top it up if it dropped.
- Check your valve bodies β Unscrew one old TRV head and note the brand on the valve body. M30 Γ 1.5 needs no adapter; Danfoss and some others need the matching adapter from the set.
- Fit one valve and test it β Screw the smart TRV on, pair it with your Zigbee hub and let it calibrate. Give it a day in a room you can turn down before you buy the rest.
- Set a schedule per room β Bedrooms warm at night and in the morning, the office during working hours, spare rooms at a low frost-protection level. Keep the room with the wall thermostat without a TRV.
- Close the gaps β Put reflector foil behind radiators on outside walls and draught strips on the doors and windows that let cold air in. Check the temperature sensors after a week to see which rooms still run cold.
β FAQ
Do smart radiator valves really save money?
They save by not heating empty rooms. How much depends on your home and routine: the more rooms you can turn down and the longer they are empty, the bigger the saving. They save little in a small home that is fully heated whenever someone is in.
Will a smart TRV fit my radiator?
Most UK radiator valves use the standard M30 Γ 1.5 thread, which smart TRVs fit directly. Danfoss RA, RAV, RAVL and some other bodies need an adapter, and many kits include a set. Check the brand on the valve body before you buy.
Do smart TRVs work with a combi boiler?
Yes. They fit the radiator, not the boiler, so they work with combi, system and regular boilers. The boiler is still switched on and off by your existing thermostat or timer.
Do I need a hub for Tuya radiator valves?
Most cheap Tuya smart TRVs are Zigbee, so yes: a Tuya Zigbee gateway, or Home Assistant / Zigbee2MQTT with a USB Zigbee dongle. If you already have one for sensors, the valves join it.
Should I put a smart TRV on every radiator?
On every radiator except the one in the room with the wall thermostat. That radiator should stay fully open so the thermostat reads the house correctly and the boiler always has somewhere to send heat.
How much does this cost from AliExpress?
The parts on this list cost between $1.02 and $20.87. Smart TRVs from AliExpress usually cost a fraction of the big UK brands, and you can start with one valve.
How long does shipping to the UK take, and is there VAT?
Delivery time depends on the seller and is shown on the product page before you pay. On orders up to Β£135 the 20% VAT is added at checkout, so there is nothing more to pay on delivery.